STAINLESS SIGHT GUIDE 51 MM  FOR DISTILLATOR

STAINLESS STAINLESS SIGHT GUIDE 51 MM on Clamp.

There is a possibility cutting the joint and then we get a tubular sight glass.

The sight glass has a full flow, the tempered borosilicate glass is sealed from the inside with special gaskets resistant to high temperatures. temperaturesę and alcohol. The construction is based on 4 fasteners and bars. The sight glass looks visually and qualitatively sensational. Very accurate workmanship. Fully stainless steel kit, complete with rods and nuts.

Speculum filling :

The sight glass is covered with a prismatic filling: springs and washers, which are as a support for the prismatic filling.

We can use copper filling, error acid-resistant.

If we use a copper filling, then the sight glass serves as a catalyst.

Montaż speculum :

If the sight glass is mounted on the CLAMP connection, then the assembly it's lightning fast, all you need to do is spit buckleą clampą sight glass for column and head.

Borosilicate GLASS:

It is resistant to aggressive chemicals contains a high percentage of silica and a significant admixtureę boron oxide. Could be milled, ground and hardened. It has a low coefficient of thermal expansion, high resistance to thermal shock and the ability for operation at temperatures up to approx. 450 °C for a longer period of time this type of glass is particularly useful for work in stable temperature conditions. Alsoż suitable to work at low temperatures. Withstands temperatures down to approximately -196 °C (e.g. in contact with liquid nitrogen). During defrosting, ensure differences temperatures not exceeding ącą 100 K. The glass is exceptionally resistant to water, alkalis, acids and organic substances.

If the sight glass is welded to the pipe, it must be unscrewed before welding. We unscrew the cap nuts and weld the stainless steel flanges to the pipe. Afterwards, the whole assembly must be shortened again and precisely inserted glass to be etched into the flange.